Call Us: +44 (0)1772 556130

New Equipment


New Equipment: Low Bed And Special Vehicles

Low Bed And Special Vehicles

Low Bed And Special Vehicles

The more possibilities a heavy transporter can offer you, the more it is valuable. For our lowbeds, Kässbohrer produces models with up to eight axles in their standard versions – with removable chassis, hydraulic controls as well as hydraulically-steerable axles.

In the lowloader series, you can choose between models from two to up to four axles.

Furthermore, we offer numerous safety options and high mobility for loading and unloading processes by bolted gooseneck design.

K.SPS 3 / 0N - 12 / 27 Light Platform Specifications

Light Platform Specs

Technical Data

Fifth Wheel Height (H5): 1.180 mm
Gooseneck (NH): 200 mm
Wheel Base (WB): 7.700 mm
External Length (L): 13.640 mm
Tare Weight ±%3: 5.500 kg

Technical Information

Chassis Made of high quality and high strength S700 MC steel, in compliance with Standard ISO 1726; made of two welded longitudinal beams in "I" form with cross beams at needed distances. Reinforced with KTL protection with Kässbohrer expertise (10 years warranty for perforation)
Brake System Dual circuit electro-pneumatic Wabco brand EBS 2S/2M brake system with anti- lock (ABS) and tilt control system (RSS) in compliance with Regulation UN ECE R13
Tyre Size 385/65 R 22.5
Electric System ASPÖCK Europoint III lightning installation with 24V LED side position lamp and 2 x 7 and 1 x 15 pin sockets, in compliance with Regulation UN ECE R48 and ADR Legislation
Axles BPW air suspension and disc brake axle with 3x9 ton capacity
Floor Hardwood coated, 30 mm thick and water resistant Hardwood flooring that can support 7.200 kg forklift axle load in compliance with DIN EN 283
Container Locks Equipped with 6 x 2 container locks suitable for carrying 1 x 20 ft. in the middle, 2 x 20 ft., 1 x 40 ft. ISO tunneled and 1 x 40 ft. high cube containers
K Fix K-Fix has 96 holes per side rave which increases load lashing variaties. Each load strapping point has a load capacity of 2.5
Front Panel Type KTL coated steel front panel with protection of steel sheet inside with 1,500 mm height. Specialized with a storage for protection of tarpaulin and working ladder
Pillars & Pockets 10 x 2 units 83 x 83 mm pillar pockets on side rave + 4 rows of 18 units 83 mm x 83 mm pillar pockets on the floor

Technical Capacities

Axle Load 27.000 kg
King Pin Capacity 12.000 kg
Gross Weight 39.000 kg

K.SPL 3 / 0N - 12 / 27 Light Platform Specifications

Light Platform Specs

Technical Data

Fifth Wheel Height (H5): 1.180 mm
Gooseneck (NH): 200 mm
Wheel Base (WB): 7.700 mm
External Length (L): 13.670 mm
Tare Weight ±%3: 5.950 kg

Technical Information

Chassis Made of high quality and high strength ST52 steel, in compliance with Standard ISO 1726-2 ; made of two welded longitudinal beams in "I" form with cross beams at needed distances. Reinforced with KTL protection with Kässbohrer expertise (10 years warranty for perforation)
Brake System Dual circuit electro-pneumatic WABCO brand EBS 2S/2M brake system with anti-lock (ABS) and tilt control system (RSS) in compliance w ith Regulation UN ECE R13
Tyre Size 385/65 R 22.5
Electric System ASPÖCK Europoint III lightning installation with 24V LED side position lamp and 2 x 7 and 1 x 15 pin sockets, in compliance with Regulation UN ECE R48 and ADR Legislation
Axles 3 x 9 tons capacity Kaessbohrer disc brake axles
Floor Phenol resin coated, 30mm thick and water resistant plywood flooring that can support 5.460 kg forklift axle load in compliance with DIN EN 283
Lashing Rings 2 x 13 units of load lashing rings each with 2.5 tons capacity on the side rave in compliance with standard EN 12640
Front Panel Type KTL coated steel panel and 1.500 mm plywood protection plate
Pillars & Pockets Vertical plug-in pillar not available

Technical Capacities

Axle Load 27.000 kg
King Pin Capacity 12.000 kg
Gross Weight 39.000 kg